Preface
Introduction
Target group
This manual is intended for machine manufacturers and service technicians.
Benefits
Engineering software Create MyConfig supports the machine manufacturer to create and run
a project for automated production and commissioning of machines with SINUMERIK 840D sl
or SINUMERIK 828D controls. These controls can also be upgraded for end users, and
automatically executed.
As a result of the modular concept, Create MyConfig enables automatic series production and
the upgrade of different machines of a series with one package.
In contrast to the conventional procedure, individual operations on the machine can be
performed faster and with greater ease and reliability.
● The production time for machines with SINUMERIK 840D sl respectively SINUMERIK 828D
is significantly reduced.
● The upgrade time for end customers is also reduced.
● A high level of reproducibility is achieved through automatic data loading.
● The quality in production and service is improved significantly.
● Lower demands are placed on the expert knowledge of the commissioning engineer.
● A modular data management for modular machines is supported at the machine
manufacturer.
● The modular machines are adapted to flexible SINAMICS topologies.
● The commissioning process is documented in a log file.
Engineering software Create MyConfig comprises the four components - Diff, Expert, Topo
and Shield:.
● Diff is a piece of comparison software that supports you in the provision of modular data.
● Expert is a piece of configuration software that supports you when creating a project.
Deployment of a project produces an executable package.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
3