Create MyConfig - Expert
4.7 Configuring user interface languages for packages
4.7.11
Language selection
Configuration language
The project engineer specifies the language selection for the interface of the Package
execution in the "Package" > "Language" > "Selection" (Page 141) tab. The operator cannot
change this selection for the package execution.
The language is selected via the "Selection" property. If the "not configured" suffix is displayed
next to the language in the drop-down list, although you can select the language, no associated
language resources have been configured.
Figure 4-134
The "Manage resources" property displays the languages for which a resource directory
already exists.
"Operator selection" configuration
In addition to the six standard languages available for selection, the project engineer can
specify the "Operator selection" as "Selection".
When configuring the "Operator selection", the operator selects the language at the start of
the package execution.
The configurable languages are displayed as buttons in an operator dialog. The operator
selects the language by clicking the appropriate language button.
Figure 4-135
366
Language selection via drop-down list
Dialog for the operator selection
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE