Installing/Routing Fibers
11.2
Installing/Routing External Fibers (Unequipped with Fiber Management Frames)
Installing/Routing External Fibers (Unequipped with Fiber
Management Frames)
Installing/Routing External Fibers — Overhead Cabling
NOTE
In the underfloor cabling scenario, ESD floors are generally used, the
installation brackets of ESD floors partially block the fiber routing
space, and power cables occupy the fiber routing space on the two
sides of the cabinet. Therefore, the actual fiber routing capability of the
cabinet is adversely affected, and optical fibers must be routed using a
fiber management cabinet or a multi-purpose fiber management
cabinet.
Securing fibers on the cabinet side
The fiber trough on one side supports a maximum of 400 fibers
(at a 2 mm diameter).
Fiber
Cable tie
Fiber binding
Fiber extractor
tape
NOTE
The overhead cabling mode for the A66B cabinet is
similar to that for the A63B cabinet.
72
A63B cabinet