Figure 70.
Lifting HRUs (2)
Operator A
Fixing HRUs on the Pole
To fix the HRU on the pole, do the following:
Prerequisites
Before proceeding with fixing the HRU on the pole, make sure that you have the
items mentioned in the table below:
Table 19.
Tools for Fixing HRUs on the Pole
Category
Recommended Torque Value
Working Tools
1
5G NR HRU Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Description
M6 Torx Screw
Torx Driver Bit (T30H)
Torque Driver (20 to 90 lbf·in)
Compass
Pull out the fastening materials so that they do not jut out from the fixing
groove of the unit bracket.
Do not pull out completely.
Confidential
Chapter 2 Installing System
Pulley
HRUs
Tower Platform
Rope
Operator B
43 lbfin (50 kgf·cm)
67