Figure 44.
Fixing HRU on the Wall (2)
Tilting
The instructions for tilting the HRU apply to all installation types.
The adjustable tilting range is as follows:
- Up tilting: 0° to 16°
- Down tilting: 0° to 16°
To adjust the HRU tilting, do the following:
Prerequisites
Before proceeding with adjusting the HRU tilting, make sure that you have the
items mentioned in the table below:
Table 13.
Tools for Tilting HRU
Category
Recommended Torque Value
Working Tools
5G NR HRU Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
1
2
Description
M8 hexagonal bolt
Torque Wrench (100 to 400 lbfin)
Torque Wrench Spanner Head (apply hexagonal head: 13 mm)
Spanner (13 mm)
Confidential
Chapter 2 Installing System
M8 Hex. Bolt
(Washer Assembly)
110 lbfin (127 kgf·cm)
45