Figure 24.
Fixing HRU on the Pole (2)
When installing the HRU, the tilting angle pointer of the unit bracket should point
to 0°.
[Angle pointer position for unit bracket with
3
5G NR HRU Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
1
2
0° tilt when installing the HRU]
Use the compass to check the azimuth of the front of the HRU.
Chapter 2 Installing System
M8 Hex. Bolt
(Washer Assembly)
Tilting angle scale of the unit bracket
Confidential
28