Appendix B
This chapter describes the procedure to clean the MPO connector.
To clean the MPO connector, do the following:
Prerequisites
Before proceeding with cleaning the MPO connector, make sure that you have the
items mentioned in the table below:
Table 32.
MPO Connector Cleaning Tools
Category
Working Tools
The configuration of the MPO cleaner is as follows:
The ferrule can be cleaned using the MPO cleaner as follows.
Before Cleaning MPO Ferrule
1
5G NR HRU Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Description
MPO Cleaning Tool (FUJIOPTICS)
Optical Power Meter
Brush
Power Switch
Brush Protective
Cover
Separate the cap from the HRU/cable side connector.
Clean the Optical
Connectors
Brush Switch
After Cleaning MPO Ferrule
Confidential
111