The adjustable swiveling is as follows:
- Left Swiveling: 0° to 30°
- Right Swiveling: 0° to 30°
To adjust the HRU swivelling, do the following
Prerequisites
Before proceeding with swiveling the HRU, make sure that you have the items
mentioned in the table below:
Table 14.
Tools for Swiveling HRU
Category
Recommended Torque Value
Working Tools
1
Figure 48.
HRU Swiveling Adjustment (1)
2
5G NR HRU Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Description
M12 hexagonal nut
Torque Wrench (100 to 400 lbfin)
Torque Wrench Spanner Head (apply hexagonal head: 19 mm)
Spanner (19 mm)
Loosen the HRU by turning M12 hexagonal nut of mounting bracket two or
three times counter clockwise.
Do not separate it completely.
1
2
Pull the HRU left/right to adjust the swiveling angle.
Confidential
Chapter 2 Installing System
372 lbfin (428 kgf·cm)
M12 Hex. Nut
49