Samsung iDCS 500 Technical Manual page 40

iDCS 500 Release 2 / OfficeServ
TECHNICAL MANUAL
LED Name
RUN Displays the power status.
Displays reception of data through an
RX
Ethernet connection.
Displays transmission of data through an
TX
Ethernet connection.
SRV Displays if card is in service.
Displays if the DSP channel are being
DSP
used.
Displays the IPC status between the MGI
IPC
card and the system.
Displays the operation status of the MGI
MOD
card.
Function
3.17
Home Page
INSTALLATION
PART 3 MARCH 2004
Status
•
On: Power to the MGI
card.
•
Off: No power to the MGI
card
•
Blinking: Data is being
received.
•
Off: Data is not being
received. after initialization
is complete.
•
Blinking: Data is being
transmitted.
•
Off: Data is not being
transmitted.
•
On: Service is available.
•
Blinking: Program is being
modified or configuration is
being downloaded.
•
Off: Service is not
available.
•
Off: All channels are not in
use.
•
Blinking (400ms ): 1 to 7
channels are in use.
•
Blinking (200ms ): 8 to 11
channels are in use.
•
Blinking (100ms ): 12 to 15
channels are in use.
•
On: All voice channels (16
channels) are in use.
•
Blinking: IPC is in normal
status.
•
Off: IPC is not in normal a
status.
•
OFF: The card has booted
and is operating normally.
•
ON: The card is not
normally on-line.
Table of Contents