Samsung iDCS 500 Technical Manual page 26

iDCS 500 Release 2 / OfficeServ
TECHNICAL MANUAL
There are several daughter boards that can mount on the MCP2
daughter boards have offset pin connectors which prohibits improper installation of the
Daughter board(s). Depending on the installation requirements the daughter boards
provide the following:
• MISC: 2 External music/audio inputs, 1 external page audio output, 1 Loud Bell audio
output, 3 relay contact closures (2 page relay, 1 common bell)
• SCM: 18 Conference channels, 12 DTMF receivers
• MFM: 12 DTMF receivers
• RCM: 14 CID receivers
• ESM: Increases the system to 1024 time slots. This board is required for multiple
cabinet systems.
MAIN CONTROL PROCESSOR (MCP2) DAUGHTER BOARD CAPABILITIES
Position Types of Daughter Boards allowed per position
MCP2 – D1 MFM, SCM, RCM or ESM*
MCP2 – D2 MFM, SCM, RCM
MCP2 – D3 MFM, SCM, RCM, MISC
* The ESM must be installed in this position in a multiple cabinet system
NOTE: Only one of any type of daughter board may be installed on any processor
card.
Only an SCM or MFM can be installed on the MCP2 not both.
In an L version system only the ESM board can be installed on the MCP2
Card. Do not Install any other types of daughter board on the MCP2 in an L
system.
Home Page
3.3
Table of Contents
INSTALLATION
PART 3 MARCH 2004
(see Figure 3−2). The