iDCS 500 Release 2 / OfficeServ
TECHNICAL MANUAL
LED INDICATIONS FOR L VERSION SYSTEM
• MP
OFF indicates the MCP2 card is powered down
ON indicates the MCP2 card is booting
Flicker Indicates normal operation.
• SM
OFF indicates the Smartmedia card is not installed or not recognized
ON indicates the Smartmedia card is inserted and recognized
Flicker indicates the Smartmedia card is being accessed.
• LAN
OFF indicates a LAN is not connected
ON indicates the LAN board is connected
• S1
Not used.
• S2
SCP HDLC RX (Receive) Status
OFF indicates that there is no link from the SCP2 card
ON indicates that the link from the SCP2 card is being set up
Flicker indicates a message has been received.
• S3
SCP HDLC TX (Transmit) Status
OFF indicates that there is no link from the SCP2 card
ON indicates that the link from the SCP2 card is being set up
Flicker indicates a message has been transmitted.
• S4
LCP1 HDLC RX (Receive) Status
OFF indicates that there is no link from the LCP2 card
ON indicates that the link from the LCP2 card is being set up
Flicker indicates a message has been received.
• S5
LCP1 HDLC TX (Transmit) Status
OFF indicates that there is no link from the LCP2 card
ON indicates that the link from the LCP2 card is being set up
Flicker indicates a message has been transmitted.
• S6
LCP22 HDLC RX (Receive) Status
OFF indicates that there is no link from the LCP2 card
ON indicates that the link from the LCP2 card is being set up
Flicker indicates a message has been received.
• S7
LCP2 HDLC TX (Transmit) Status
OFF indicates that there is no link from the LCP2 card
ON indicates that the link from the LCP2 card is being set up
Flicker indicates a message has been transmitted.
• S8
Not used.
• S9
Not used.
Home Page
3.2
Table of Contents
INSTALLATION
PART 3 MARCH 2004