Fujitsu 1740 User Manual page 81

3.1.2 Rack without stabilizers
Item
Product name 19-inch rack Model 1740 base rack
Type name 19R-174A2
Appearance Coated black (front and rear doors with punched metal finish)
Unit mounting
40U
capacity
Size (w) x (d) x
700 x 1050 x 2000
(h) mm
Total rack capacity: 935 kg (*1)
Load capacity
Total load capacity: 800 kg (excluding rack)
(kg)
Rack:
Security Front and rear doors locked with keys (Key operation is required for handle locking.)
・ Front door, rear door, and a pair of side covers
(attached to the rack before shipment)
・ Rack door keys: 2
・ Cage nuts/screws (washers attached before
shipment): 50 each
・ (If cage nuts/screws are used for mounting
Accessories devices at the factory, remaining cage nuts/
screws are supplied.)
・ Cage nut tool
・ Blank panels: 1U x 3, 2U x 5, and 3U x 3 panels
・ Cable holders: 24 (attached to the rack before
shipment)
・ User's guide
*1) Ensure that the floor load based on the total rack capacity does not exceed the floor strength
(withstand load) at the installation site (such as an office).
*2) The expansion rack is not equipped with a pair of side covers.
The base rack can be connected to an expansion rack, and the expansion rack can be
connected to another expansion rack. Note, however, that these racks cannot be
connected to Model 1640 and 1624 racks and other series racks.
Specifications
135 kg
19-inch rack Model 1740 expansion rack
19R-174B2
Total rack capacity: 902 kg (*1)
Total load capacity: 800 kg (excluding rack)
Rack: 102 kg
・ Front door and rear door (attached to the rack
before shipment) (*2)
・ Rack door keys: 2
・ Connection kit: 1 set
・ Cage nuts/screws (washers attached before
shipment): 50 each
・ (If cage nuts/screws are used for mounting
devices at the factory, remaining cage nuts/
screws are supplied.)
・ Cage nut tool
・ Blank panels: 1U x 3, 2U x 5, and 3U x 3 panels
・ Cable holders: 24 (attached to the rack before
shipment)
・ User's guide
3 Rack Configuration and Installation
E
81