Fujitsu 1740 User Manual page 126

4.4.2 Attaching rear brackets and temporarily mounting the
table
1
Using the rear M6 cage nuts that were attached in step 2 according to
Section 4.4.1, "Inserting cage nuts," temporarily affix rear bracket L to the
mounting position adjustment bracket and rear bracket R to the rack post.
Use M6 screws to fix the brackets in position.
2
Confirm that front brackets L and R, being held in position by the simple
retainer mechanism of the slide rails, do not move.
126
In step 2, you will mount the table on rear brackets L and R.
Temporarily fix the rear brackets in position to the extent that the table will not drop
down when it is placed on the rear brackets.