Fujitsu 1740 User Manual page 111

6
Reassemble the rod assembly for the door handle.
Remove the M3 bind head screw securing the rod to the door handle, and then remove the
rod. (The spacer is removed together with it.)
Be careful not to lose the spacer.
While holding the upper (short) rod with the curved end facing the left, use the M3 bind head
screw and the spacer to secure the rod to the right side of the handle.
The upper and lower rods are different in length. The upper rod is shorter than the
lower rod.
'
Upper rod (short)
(Disassemble)
Lower rod (long)
Upper rod (short)
(Assemble)
Spacer
M3 bind
head screw
Lower rod (long)
4 Handling the Rack after Installation
E
111