Fujitsu 1740 User Manual page 133

4.5.1 Attaching cable holders
1
Secure the front or rear cable holder to the desired hole on the frame with
the M5 screw, which is supplied with the rack. Use a Phillips screwdriver to
tighten the M5 screw. The screw is a self-tapping screw, which needs to
cut its own threads as it is screwed into its hole. For this reason, tightening
the screw requires a certain degree of strength.
'
Frame M5 screw
(Front)
Front cable holder Phillips screwdriver
Frame
M5 screw
(Rear)
Phillips screwdriver Rear cable holder
E
133
4 Handling the Rack after Installation