Fujitsu 1740 User Manual page 102

6
Reassemble the rod assembly for the door handle.
Remove the M3 bind head screw securing the rod to the door handle, and then remove the
rod. (The spacer is removed together with it.)
While holding the upper (short) rod with the curved end facing the left, secure the rod
together with the spacer to the right side of the handle with the M3 bind head screw.
'
Upper rod (short)
102
Be careful not to lose the spacer.
The upper and lower rods are different in length. The upper rod is shorter than the
lower rod.
(Disassemble)
M3 bind
head screw
Spacer
Lower rod (long)
Upper rod (short)
(Assemble)
Lower rod (long)