Toro ProPass 200 Operator's Manual page 33

Figure 51
1. Lift cylinder locking pin
12. Store the cylinders in the storage clips. Engage the
hydraulic lift lock lever on the vehicle to prevent
accidental extension of the lift cylinders.
13. Raise the rear jack stands until enough clearance is
attained to drive the vehicle away from the machine.
14. Walk around the machine. Ensure that it is clear of
the work vehicle's frame and secured within each of
the four storage stand legs.
15. With the work vehicle in neutral gear, set the parking
brake and start the engine.
16. Release the parking brake and slowly drive the work
vehicle forward, away from the machine truck-mount
on the storage stand.
WARNING
Do not climb under or perform work on the
machine while it is on the storage stand.
33