Verizon GT704WG User Manual page 73

Wireless dsl gateway
Table of Contents

Advertisement

text box. When the list appears, click on the proper Ethernet adapter.
In the fields below, the Ethernet adapter's various addresses appear. There
should be an entry for
Additionally, the "
(with "x" defining a range from 2 though 255).
If the Ethernet adapter is showing an incorrect
sets all values back to
seconds). The renewed IP address should be on the 192.168.1.x network.
If an error occurs, or the IP address renews with an address outside the
192.168.1.x network, contact the
If running Windows 98
s
settings. Select Start, Run, enter
IP
in the "Open" text box, then press OK. A "
ing cursor (prompt). Enter
at the cursor, then press Enter on the keyboard.
The
address of the Ethernet adapter should appear in the
IP
Ensure the
address in the 192.168.1.x network (with "x" defining a range
IP
from 2 though 255).
If the Ethernet adapter is showing an incorrect
at the cursor, then press Enter on the keyboard, which sets all values back to
0 (zero). Next, enter
at the cursor, then press Enter on the keyboard (this process may take a few
seconds). The renewed
If an error occurs, or the
192.168.1.x network, contact the
Ensure the browser is not set to "Never dial a connection" and there are no
s
previous
settings.
LAN
To check this, go to Start, Settings, Control Panel. In the Control Panel,
double-click Internet Options. When the "Internet Properties" window
appears, ensure that the "Never dial a connection" option is not activated,
then click
Settings. When the "Local Area Network (
LAN
window appears, ensure that no settings are activated. If there are settings
activated, deactivate them.
Shutdown and restart the computer. After the computer restarts, unplug the
s
power cord from the Gateway and plug it back in. When the lights glow solid
green, try accessing the Internet.
Wireless DSL Gateway User Manual
address, Subnet Mask, and Default Gateway.
IP
Address" entry should be on the 192.168.1.x network
IP
(zero). Then, click Renew (this process may take a few
0
ISP
, Me, 2000, or
SE
CMD
ipconfig
ipconfig /release
ipconfig /renew
address should be on the 192.168.1.x network.
IP
address renews with an address outside the
IP
ISP
68
address, click Release, which
IP
immediately.
, check the computer's
XP
" window appears, with a blink-
DOS
address, enter
IP
immediately
TCP/
window.
DOS
) Settings"
LAN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents