Service Mode And Host Machine State - Canon imagePRESS C800 Series Technical & Service Manual

Service mode and host machine state

Introduction
This topic describes the different possibilities to enter the Service mode and the corresponding
state of the host machine.
Service mode and the corresponding host machine state
Via the Splash screen
Select [Service mode] on
splash screen .
After an error occurred
Select [Go to service mode]
on error screen
Description
Engine state: Off
Status bar: Engine Idle (Cold SDS)
Level = low
Purpose:
• Analyse and execute settings / ad-
justments via system SDS
Engine state: On
Status bar: Engine Idle (Cold SDS)
Level = low
Purpose:
• Analyse and execute settings / ad-
justments via system SDS
• To analyse the engine when in an
error situation
Description
Engine state: Off
Status bar: Off
Level = low
Purpose:
• To analyse the PRISMAsync in an
error situation
Engine state: On with error
Status bar: Off
Level=low
Purpose:
• To analyse the engine and PRIS-
MAsync in an error situation
Service mode and host machine state
User Interface
User Interface
Chapter 4 - Using the PRISMAsync 45