Reuse An Usb Stick After Installation - Canon imagePRESS C800 Series Technical & Service Manual

Reuse an USB stick after installation

Reuse an USB stick after installation
Prepare a USB stick for reuse
It is possible to re-use the USB stick after an installation. When a USB stick is used for an
installation the name of the USB stick is changed from "OCEINSTALL" to "USEDKEY".
Please take the following steps to re-use the stick for a new installation of the system software.
Procedure
1. Put the USB stick into a USB port of your computer.
2. Open the Explorer window.
3. Check if the name of the USB stick is "USEDKEY" .
4. To prepare the USB-stick for re-use, open the contents of the stick in your explorer and double-
click the "ReUseKey.bat" file.
5. Check (in your explorer screen) if the name of the USB stick has changed to "OCEINSTALL".
If the name did not change it might be needed that you remove the stick and insert it again.
6. Your USB stick is now ready for a new installation.
NOTE
Be aware that the settings you selected at creation of the USB stick (e.g. "keep existing jobs and
settings after installation") will be used after the stick is prepared for re-use.
108 Chapter 9 - System software