Free space around the unit
Required free space around the drive to enable cooling air flow, service and
maintenance is shown below in millimetres and [inches].
50 [2.0]
IP21 (UL 1)
Mounting the drive on the wall
Units without vibration dampers
1. Mark the locations for the four holes. The mounting points are shown in chapter
Dimensional
2. Fix the screws or bolts to the marked locations.
3. Position the drive onto the screws on the wall. Note: Lift the drive by its lifting
holes, not by its cover.
4. Tighten the screws in the wall securely.
Units with vibration dampers
In applications with considerable vibration in the frequency range of 50 Hz to
100 Hz, vibration dampers can be used. See ACS800 Vibration Damper Installation
Guide [3AFE68295351 (English)].
200 [7.9]
50 [2.0]
200 [7.9]
drawings.
Cooling air flow
Mechanical installation
41