Contents - ABB ACS800 Series Hardware Manual

22

Contents

The chapters of this manual are briefly described below.
Safety instructions
operation and maintenance of the drive.
Introduction to this manual
commissioning the drive and refers to chapters/sections in this manual and other
manuals for particular tasks.
Operation principle and hardware description
Mechanical installation
Planning the electrical installation
protections and cable routing.
Electrical installation
Installation of the AGPS board (Prevention of unexpected start-up, +Q950)
describes the electrical installation of the optional Prevention of unexpected start-up
function (+Q950).
Installation of the ASTO board (Safe torque off, +Q967)
installation of the optional Safe torque off function (+Q967).
Motor control and I/O board (RMIO)
I/O board.
Installation checklist
installation of the drive.
Start-up and use
Actual signals and parameters
ACS800-11 and ACS800-U11.
Maintenance
Fault tracing
Technical data
sizes and technical requirements and provisions for fulfilling the requirements for CE
and other markings.
Dimensional drawings
External +24 V power supply for the RMIO boards via terminal X34
connect an external +24 V power supply for the RMIO board via terminal X34.
Introduction to this manual
give safety instructions for the installation, commissioning,
lists the steps in checking the delivery and installing and
instructs in how to place and mount the drive.
shows how to wire the drive.
contains a list for checking the mechanical and electrical
contains guide lines of the start-up and use of the drive
contains listings of parameters specific to the
contains preventive maintenance instructions.
contains guidelines for fault tracing.
contains the technical specifications of the drive, e.g. the ratings,
contains the dimensional drawings of the drive.
describes the drive.
instructs in the motor and cable selection,
shows the external control connections to the
describes the electrical
describes how to