External +24 V power supply for the RMIO boards
via terminal X34
What this chapter contains
This chapter describes how to connect an external +24 V power supply for the RMIO
boards of the motor-side and line-side converters via terminal X34. For current
consumption of the RMIO board, see chapter
Note: For the motor-side converter RMIO board, external power is easier to supply
via terminal X23, see chapter
Parameter settings
In Standard Application Program, set parameter 16.09 CTRL BOARD SUPPLY to
EXTERNAL 24V if the RMIO board is powered from an external supply.
Motor control and I/O board
External +24 V power supply for the RMIO boards via terminal X34
Motor control and I/O board
(RMIO).
139
(RMIO).