Introduction To This Manual; What This Chapter Contains; Intended Audience; Categorization According To The Frame Size - ABB ACS800 Series Hardware Manual

Introduction to this manual

What this chapter contains

This chapter describes the intended audience and contents of this manual. It
contains a flowchart of steps in checking the delivery, installing and commissioning
the drive. The flowchart refers to chapters/sections in this manual and other
manuals.

Intended audience

This manual is intended for people who plan the installation, install, commission, use
and service the drive. Read the manual before working on the drive. The reader is
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
This manual is written for readers worldwide. Both SI and imperial units are shown.
Special US instructions for installations within the United States that must be
installed per the National Electrical Code and local codes are marked with (US).

Categorization according to the frame size

Some instructions, technical data and dimensional drawings which concern only
certain frame sizes are marked with the symbol of the frame size R2, R3, ... or R8.
The frame size is not marked on the drive designation label. To identify the frame
size of your drive, see the rating tables in chapter
The ACS800-11/U11 is manufactured in frame sizes R5 and R6.

Categorization according to the plus code

The instructions, technical data and dimensional drawings which concern only
certain optional selections are marked with plus codes, e.g. +E202. The options
included in the drive can be identified from the plus codes visible on the type
designation label of the drive. The plus code selections are listed in chapter
Operation principle and hardware description
Technical data.
under Type code.
Introduction to this manual
21