External +24 V Power Supply For The Rmio Board Via Terminal X34; What This Chapter Contains; Parameter Settings - ABB ACS800 Hardware Manual

External +24 V power supply for the RMIO board via
terminal X34

What this chapter contains

This chapter describes how to connect an external +24 V power supply for the RMIO
board via terminal X34. For the current consumption of the RMIO board, see chapter
Motor Control and I/O Board (RMIO).
Note: External power is easier to supply to the RMIO board via terminal X23, see
chapter Motor Control and I/O Board (RMIO).

Parameter settings

In Standard Control Program, set parameter 16.09 CTRL BOARD SUPPLY to
EXTERNAL 24V if the RMIO board is powered from an external supply.

External +24 V power supply for the RMIO board via terminal X34

147