Suzuki GRAND VITARA JB416 Service Manual page 433

Hide thumbs Also See for GRAND VITARA JB416:
Table of Contents

Advertisement

Step
3
DTC check of BCM
1) Turn ignition switch to OFF position.
2) Connect connectors of disconnected control modules
communicating by means of CAN.
3) Disconnect connector from any one of control modules
other than BCM.
4) Recheck DTC for BCM.
Is DTC U1073 detected?
DTC U1100 (No. 1100): Lost Communication with ECM
Wiring Diagram
Refer to "DTC U1073 (No. 1073): Control Module Communication Bus Off: ".
DTC Detecting Condition and Trouble Area
DTC detecting condition
BCM can not receive CAN data from ECM for
longer than specified time continuously.
DTC Confirmation Procedure
1) Connect scan tool to DLC with ignition switch turned OFF.
2) Turn ON ignition switch and clear DTC by using scan tool.
3) Start engine and run it for 1 min. or more.
4) Check DTC.
DTC Troubleshooting
Step
1
DTC check of BCM
Is DTC U1100 (No. 1100) and DTC U1073 (No. 1073)
detected together?
2
DTC check of ECM
1) Check ECM for DTC.
Is DTC P1674 detected?
3
DTC check of ABS or ESP® control module
1) Check DTC for ABS or ESP® control module.
Is DTC U1073 detected?
Action
• CAN communication circuit
• BCM
• ECM
Action
Body Electrical Control System:
Yes
Disconnect connectors
of control modules other
than the one whose
connector is
disconnected in Step 3)
one by one and check
that DTC U1073 is
detected by BCM each
time connector is
disconnected. When
DTC U1073 is not
detected by BCM while
checking in this way, go
to description under
"NO" below. If DTC
U1073 is detected by
BCM even when
connectors of all control
modules that use CAN
communication with
BCM are disconnected,
substitute a known-
good BCM and recheck.
Trouble area
Yes
Go to "DTC U1073 (No.
1073): Control Module
Communication Bus
Off: ".
Go to "DTC P1674:
CAN Communication
(Bus Off Error): in
Section 1A".
Go to "DTC U1073:
Control Module
Communication Bus
Off: in Section 4E".
10B-13
No
Check power and
ground circuit of control
module disconnect in
Step 3). If circuit is OK,
substitute a known-
good control module
disconnected in Step 3)
and recheck.
S5JB0EA204014
No
Go to Step 2.
Go to Step 3.
Go to Step 4.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grand vitara jb420

Table of Contents