Suzuki GRAND VITARA JB416 Service Manual page 223

3) Remove disc by using 8 mm bolts (1) (2 pcs).
Tightening Torque Specifications
Fastening part
Caliper pin bolt
Wheel nut
Flexible hose joint bolt
Caliper carrier bolt
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fastener Information: in Section 0A in
related manual".
Installation
1) Install disc to wheel hub.
2) Install caliper assembly to steering knuckle.
3) Tighten caliper carrier bolts (1) to specification.
Tightening torque
Caliper carrier bolt (a): 85 N·m (8.5 kgf-m, 61.5
lb-ft)
IYSQ01420025-01
4) Install wheel and lower vehicle.
5) Tighten wheel nuts to specified torque.
Tightening torque
Wheel nut: 100 N·m (10.0 kgf-m, 72.5 lb-ft)
6) Upon completion of installation, perform brake test.
Specifications
Tightening torque
N⋅m kgf-m
36 3.6
100 10.0
23 2.3
85 8.5
Front Brakes:
1,(a)
I5JB0A420011-01
S5JB0E4207001
Note
lb-ft
26.0 /
72.5 / /
17.0
61.5
4B-3