Epson Stylus COLOR 900 Service Manual page 109

EPSON Stylus COLOR 900/900N
4. Release the four hooks securing the roller to the frame, and then
remove the roller.
Frame
Release hooks
securing roller to frame
Figure 4-29. Feed Roller Removal
C A U T I O N
Never touch the rubber part of the feed roller with your
bare hands.
Chapter 4 Disassembly and Assembly
C H E C K
During assembly, secure compression spring
r
P O I N T
1.66 to the hooks inside the roller frame as
shown below. This makes it easier to install the
roller on the hopper assembly. After
installation, unhook the spring by rotating it
with a pair of pliers inserted through the hole in
the back of the roller frame.
Figure 4-30. Installing the Compression Spring
106