Epson Stylus COLOR 900 Service Manual page 105

EPSON Stylus COLOR 900/900N
4.2.8.4 Pump/ASF Motor and Solenoid Removal
1. Remove either the printer mechanism (see
board unit (see page 94).
2. Remove the one screw securing the solenoid to the switching
mechanism frame, and remove the solenoid.
3. Remove the three screws securing the switching mechanism frame
to the printer mechanism, and then remove the switching
mechanism frame along with the pump/ASF motor.
4. Remove the two screws securing the pump/ASF motor to the
switching mechanism frame, and remove the pump/ASF motor.
page 92) or the main
Chapter 4 Disassembly and Assembly
Screws securing the Switching Mechanism Frame
to the Printer Mechanism
Switching Mechanism
Frame Screws securing the Pump/ASF Motor
Figure 4-21. Pump/ASF Motor and Solenoid Removal
.
Screw securing
the Solenoid
102