Epson Stylus COLOR 900 Service Manual page 103

EPSON Stylus COLOR 900/900N
4.2.8.2 Carriage (CR) Motor Removal
1. Remove the upper case. (See
2. Release the carriage lock at the back of the printer mechanism, then
move the carriage unit away from its home position.
(See Figure 4-14.)
3. Remove the two screws securing the CR motor to the printer
mechanism, and then remove the CR motor.
Figure 4-18. CR Motor Removal
page 91.)
Screws securing the CR Motor
Chapter 4 Disassembly and Assembly
C A U T I O N If you replace the CR Motor, perform any necessary
adjustments. (See Table 4-1)
100