Line Data / Operating Mode - Siemens SINAMICS S120 Commissioning Manual

Commissioning
4.8 Basic parameterization of the drive objects
Activating a function module
1. To activate a function module, click on the required function module (e.g. master/slave).
Repeat this step for all additional function modules that you wish to activate.
2. Save the project to back up the settings.
4.8.2.3

Line data / operating mode

☐
You set the most important parameters for the operation of an infeed in the function view of
the "Line data / operating mode" screen form. The corresponding parameters are displayed
depending on the infeed type.
Figure 4-61
The representation of this screen form is dependent upon the respective Line Module being
used:
Setting
Device supply volt-
age
DC-link voltage
setpoint default
setting
168
"Infeed unit > Parameters > Basic parameterization > Line data/operating mode"
Example: Line data/operating mode for an Active Line Module
ALM
x
x
SLM BLM Explanation
x x -
x - The value in this field (p3510) is deter-
mined automatically from the defined
operating voltage.
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
Commissioning with Startdrive