C.2 Sector Structure of 1M Bit Flash Memory
C.2 Sector Structure of 1M Bit Flash Memory
Sector structure of 1M bit flash memory in MB90F583 is shown in Figure C.2a. The address in the
Figure C.2a shows upper and lower address of each sector. When accessing from CPU, SA0 is set in the
FE bank register and SA1~4 are set in the FF Bank register.
*Programmer address:
358
Appendix C: The Flash Memory in the MB90F583
CPU Address
Flash Memory
SA4 (16K Bytes)
SA3 (8K Bytes)
SA2 (8K Bytes)
SA1 (32K Bytes)
SA0 (64K Bytes)
The programmer address is equivalent to the CPU address map where data is
programmed to or erased from flash memory by the parallel writer (Minato Elec-
tronic: Model 1890A). When programmed to or erased from the flash memory by
a
general-purpose programmer, this address is needed to specified.
Figure C.2a Sector structure of 1M bit flash memory
Programmer Address*
FFFFFF
7FFFFF
H
FFC0000
7FC0000
H
FFBFFFF
7FBFFFF
H
FFA0000
7FA0000
H
FF9FFFF
7F9FFFF
H
FF80000
7F80000
H
FF7FFFF
7F7FFFF
H
FF00000
7F00000
H
FEFFFF
7EFFFF
H
FEFFFF
7EFFFF
H
H
H
H
H
H
H
H
H
H
H
MB90580 Series