Mitsubishi Electric Melsec-Q172DCPU User Manual page 54

2 SYSTEM CONFIGURATION
Part name Model name
AC05TB
AC10TB
Cable for
AC20TB
connector/
terminal block AC30TB
conversion
AC50TB
module
AC80TB
AC100TB
MR-J3BUS M
SSCNET
MR-J3BUS M-A
cable
MR-J3BUS M-B
(Note-8)
Q173DSXYCBL01M Length 0.1m (0.33ft.)
RIO cable
Q173DSXYCBL05M Length 0.5m (1.64ft.)
(Note-1):
(Note-2): The manual pulse generator or incremental synchronous encoder that consumes less than 0.2[A] of
(Note-3): 5VDC internal current consumption of shared equipment with PLC might be changed.
(Note-4): Be sure to use the power supply module within the range of power supply capacity.
(Note-5): Battery Q6BAT is not attached to Battery holder unit Q170DBATC. Please purchase it separately.
(Note-6): Be sure to use the cable for forced stop input (sold separately). The forced stop cannot be released
(Note-7): These modules can be used in Q172DLX. It cannot be controlled using Q173DPX.
(Note-8): Please contact your nearest Mitsubishi Electric sales representative for the cable of less than
Motion controller related module (continued)
(Note-1)
Length 0.5m (1.64ft.)
Length 1m (3.28ft.)
Length 2m (6.56ft.)
Length 3m (9.84ft.)
Length 5m (16.40ft.)
Length 8m (26.25ft.)
Length 10m (32.81ft.)
• Q173DSCPU/Q172DSCPU
MR-J4(W)- B
• Q173D(S)CPU/Q172D(S)CPU
MR-J3(W)- B
• Standard cord for inside panel
0.15m(0.49ft.), 0.3m(0.98ft.), 0.5m(1.64ft.), 1m(3.28ft.), 3m(9.84ft.)
• Q173DSCPU/Q172DSCPU
MR-J4(W)- B
• Q173D(S)CPU/Q172D(S)CPU
MR-J3(W)- B
• Standard cable for outside panel
5m(16.40ft.), 10m(32.81ft.), 20m(65.62ft.)
• Q173DSCPU/Q172DSCPU
MR-J4(W)- B
Q173D(S)CPU/Q172D(S)CPU
MR-J3(W)- B
• Long distance cable
30m(98.43ft.), 40m(131.23ft.), 50m(164.04ft.)
=Cable length (015: 0.15m(0.49ft.), 03: 0.3m(0.98ft.), 05: 0.5m(1.64ft.), 1: 1m(3.28ft.), 2: 2m(6.56ft.),
3: 3m(9.84ft.), 5: 5m(16.40ft.), 10: 10m(32.81ft.), 20: 20m(65.62ft.), 25: 25m(82.02ft.),
30: 30m(98.43ft.), 40: 40m(131.23ft.), 50:50m(164.04ft.)
current can be connected to the internal I/F connector.
Be sure to refer to the MELSEC-Q series PLC Manuals.
without using it.
Cable for forced stop input is not attached to the Motion CPU module. Please purchase the cable for
length according to system separately.
30m(98.43ft.).
Description
MR-J4(W)- B/
MR-J4(W)- B/MR-J4(W)- B
MR-J3(W)- B/
MR-J3(W)- B
MR-J4(W)- B/
MR-J4(W)- B/MR-J4(W)- B
MR-J3(W)- B/
MR-J3(W)- B
MR-J4(W)- B/
MR-J4(W)- B/MR-J4(W)- B
MR-J3(W)- B/
MR-J3(W)- B
2 - 21
Current
consumption
5VDC[A]
——
——
——
——
——
——
——
LJ72MS15
——
LJ72MS15
——
LJ72MS15
——
——
——
Remark