Huawei PDU8000 Series User Manual page 64

PDU8000 Modular Precision Power Distribution Cabinet
User Manual
Step 9 Use diagonal pliers to cut cable inlet and outlet holes on rodent-proof meshes based on the
number and specifications of cables to be routed.
Figure 5-34 Cutting holes in the rodent-proof meshes
Step 10 Reinstall the rodent-proof meshes.
Step 11 Seal cable inlet and outlet holes on the PDC using firestop putty.
Step 12 Reinstall the transparent covers of the input copper bar and N bar.
Figure 5-35 Position for the transparent cover of the input copper bar
(1) Position for the transparent cover of the input
copper bar
----End
Issue 02 (2016-11-10)
 When installing the transparent cover for the N bar, verify that one side of the cover is flush with the
outer side of the N bar.
 Reinstall the transparent cover for the input copper bar.
Copyright © Huawei Technologies Co., Ltd.
5 Installation Guide
Figure 5-35 shows the installation position.
(2) Position for the fuse mounting
board
57