Huawei PDU8000 Series User Manual page 59

PDU8000 Modular Precision Power Distribution Cabinet
User Manual
2.
Step 2 (Optional) Cut holes in the bottom in the bottom cabling scenario.
1.
2.
Step 3 Remove the transparent covers of the N bar and input copper bar, and put the covers aside for
future use, as shown in
Issue 02 (2016-11-10)
Figure 5-25 Removing rodent-proof meshes at the top
Put the rodent-proof meshes aside for future use.
Cut a number of holes in the bottom based on the number of cables to be routed.
Figure 5-26 Cutting holes in the bottom
Install grommet strips in the prepared cable inlets.
Figure 5-27
Copyright © Huawei Technologies Co., Ltd.
and Figure 5-28.
5 Installation Guide
52