Input Source Selection (Video 2, Video 3 Terminals/Video, Component) - Sanyo PLV-45WR1Z Owner's Manual

Input Source Selection (VIDEO 2, VIDEO 3 Terminals/Video, Component)

Direct Operation
Select VIDEO2 / VIDEO3 by pressing the VIDEO2 and VIDEO3 button
on the remote control or pressing the INPUT button on the front
control arbitrary number of times.
Menu Operation
1 Select the Input Menu with the Point Up/Down button, and then
press the Point Right button to enter the sub-menu.
2 Select VIDEO2 / VIDEO3 with the Point Up/Down button and
then press the OK button or the Point Right button. The Source
Select Menu will appear.
3 Move the pointer to the source that you want to select and then
press the OK button.
38
INPUT button
TV
VIDEO 1
VIDEO 2
VIDEO 3
PC 1
PC 2
Front Control Remote Control
–AUDIO–R
INPUT
VIDEO 1
MENU OK
INPUT button
VIDEO2 / VIDEO3 button
Input Menu
Source Selection Menu
pointer
Closes
selection menu.
Video Input
(FRONT)
TV VIDEO3
VIDEO2 PC 1 PC 2
A・B SURROUND
OK
the source