USING COMPONENT JACKS TO CONNECT A DVD PLAYER
OR OTHER DIGITAL EQUIPMENT
The Component Video jacks will accept HDTV, EDTV, or
SDTV video content.
Switch off the LCD Projection TV and external equipment
before connecting cable. (Cable is not supplied.) Follow
these steps to easily connect your STB or DVD Player to
this LCD Projection TV.
Connect DVD Player or similar digital equipment's
1
Component Video Out to the LCD Projection TV's
Video (VIDEO2 or VIDEO3) jacks.
DVD PLAYER
(or similar digital device such
as a Satellite Receiver.)
2
VIDEO CABLE
R-AUDIO-L
AUDIO
OUTPUT
WOOFER
■
VIDEO2 and VIDEO3 jacks have identical functions.
Compatible video devices can be connected to either set of
jacks.
■
Press the INPUT key after connecting the cables, to select
the Video 2 or Video 3 input signal. There is NO need to
tune to a blank channel.
ANALOG AV CONNECTIONS
1
1
COMPONENT
(MONO)
Y–––––Pb–––––Pr
VIDEO
3
Y–––––Pb–––––Pr
VIDEO
2
S-VIDEO
VIDEO
VIDEO
1
PTV BACK
Connect DVD Player or similar digital equipment's
2
Audio Out to the LCD Projection TV's VIDEO2 or
VIDEO3 Audio jacks.
3
Press POWER to turn on the LCD Projection TV,
then turn on external equipment.
Press INPUT to select Video 2 or Video 3 to view
4
the DVD program.
REMOTE CONTROL
4
2
AUDIO
CABLE
What you will need for connections:
R-AUDIO-L
(MONO)
Component Video Cable – 1
Audio Cable – 1
R-AUDIO-L
(MONO)
IMPORTANT NOTE FOR MONITOR USE:
R-AUDIO-L
(MONO)
If you did not connect an antenna, you must
run All Channel Search twice before you can
select the AV inputs.
■
"No Signal" will appear on the screen when no signal is
detected.
INPUT
POWER
1
2
3
4
5
6
3
15