Table of Contents
Advertisement
TV Operation
Channel Block Setting
This function enables you to block others from viewing some
programs.
1
Select a channel that you wish to block.
2
Hold down the RECALL (
more than 2 seconds.
3
Press the TV MENU button on the remote control while the
selected channel position is displayed in center of the screen.
Then the channel is blocked.
4
To cancel the channel blocking, select the channel blocked and
then repeat step 2 to 3 above.
To view the blocked channel, select the channel and then hold
down the RECALL button for more than 2 seconds. Then press
the RECALL button again.
The channel will be blocked again when you switch to another
channel.
Sound Selection
You can switch STEREO/MONO or A, B/MONO by pressing the
STEREO/MONO (
dA
For NICAM Stereo Programs
NICAM/MONO switches as follows everytime the STEREO/MONO
button is pressed.
NICAM
For NICAM Bilingual Programs
A, B, or MONO switches as follows everytime the STEREO/MONO
button is pressed.
A
32
) button on the remote control for
·
) button on the remote control.
B
MONO
B
Remote Control
TV
VIDEO 1
A・B SURROUND
On-Screen TV Menu
The blocked channel is displayed with "X" mark as
above.
Remote Control
TV
VIDEO 1
A・B SURROUND
On-Screen TV Menu
MONO
VIDEO3
VIDEO2
PC 1
PC 2
RECALL button
OK
VIDEO3
VIDEO2
PC 1
PC 2
STEREO/MONO
button
OK
Advertisement
Table of Contents
