Table of Contents
Advertisement
Installation
Installing the LCD Projection TV
Note on Plug & Play
This LCD Projection TV provides "Plug & Play" function.
Before connecting the AC power cord into an AC outlet
and turn on the LCD Projection TV, necessary preperation
should be done as directed in the following pages.
Placing and Settling the LCD Projection TV
CAUTION
When placing the LCD Projection TV, the spaces for
ventilation must be maintained.
10cm
Place the LCD Projection TV on flat places or with an
exclusive LCD Projection TV stand. Placing on unflat
places may cause picture tilt or distortion.
Do not place the LCD Projection TV under direct sunlight.
This may have a damaging effect on picture quality and
the screen surface of the LCD Projection TV.
CAUTION
Never touch the Projection Screen directly with hand. It
may effect the projection image quality.
BE SURE TO USE OR PLACE THE LCD PROJECTION
TV IN THE TEMPERATURE INDICATED BELOW:
Operating Temperature
Storage Temparature
6
10cm
50cm
10cm
5°C ~ 35°C
–10°C ~ 60°C
Air Circulation
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked
or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the LCD Projection TV, the following
precautions should be taken.
– Do not put any flammable objects near the vent.
– Keep the exhaust vent at least 1.5'(50cm) away from
any objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the LCD Projection TV is being used.
Cooling fans are provided to cool down the LCD Projection
TV. This LCD Projection TV monitors internal temperature
and control the running speed of the cooling fans.
Exhaust Vent
(Hot air exhaust)
Exhaust Vent
(Hot air exhaust)
Advertisement
Table of Contents
