Computer System Selection - Sanyo PLV-45WR1Z Owner's Manual

Computer Input

Computer System Selection

This LCD Projection TV can detect most of the current computer systems with the Multi-scan system and the Auto PC
adjustment function provided in the LCD Projection TV. When selecting computer input, the LCD Projection TV
automatically displays the most proper image for the input signal. One of the following four displays appears on the system
menu icon. If the LCD Projection TV does not tune the input signal and the projected image is not displayed properly, or
when you wish to adjust it manually, perform manual adjustment as described on page 48-49.
When the LCD Projection TV cannot recognize the
Auto
connected signal as PC system provided in this LCD
Projection TV, the Auto PC Adjustment function operates
to adjust the LCD Projection TV and the message "Auto"
is displayed in the PC System Menu icon. When the
image is not provided properly, manual adjustment is
required. (p48-49)
There is no signal input from the connected computer.
– – – –
Check the connection of the computer and see if the
LCD Projection TV is set correctly.
(See "Troubleshooting" on page 61.)
User preset adjustment in Computer Adjustment.
Mode 1
Adjustment data can be stored in Mode 1 - 5. (p48-49)
Computer systems provided in the LCD Projection TV.
SVGA 1
The LCD Projection TV chooses a proper system and
displays it.
*Mode 1 and SVGA 1 are examples.
Menu Operation
PC system can also be selected manually if some PC systems appear
on the On-Screen Menu.
1 Select the PC System Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
2 Choose the system that you want to select with the Point
Up/Down button and then press the OK button.
46
PC System Menu
PC System Menu