Selecting The Channel; Direct Channel Selection; Channel Up And Down Selection; Alternate Channels - Sanyo PLV-45WR1Z Owner's Manual

Selecting the Channel

Direct Channel Selection

Position 0 to 9
Select a channel from 0 to 9 with each number key of the Channel
buttons on the remote control.
Position 0 to 99
Press the DIGIT (-/--) button and then "--" will be displayed on the
screen. Input 2 digit number with the number keys (e.g. press "2" and
"5" to select channel 25) of the Channel buttons on the remote
control.
Position 100 to 199
Press the DIGIT (-/--) button twice and then "1--" will be displayed on
the screen. Input 2 digit number with the number keys.
Position 200 to 255
Press the DIGIT (-/--) button twice. While "1--" is displayed on the
screen, press the DIGIT (-/--) button again and then "2--" will be
displayed on the screen. Input 2 digit number with the number keys.

Channel Up and Down Selection

Switch channels with the POSITION Up/Down button on the remote
control or the front control. Press the POSITION Up button to the
next position, and the POSITION Down button to the previous
position.
NOTE:
Channel selection can be made in TV, Video and PC input mode.

Alternate Channels

You can switch channels alternately between the present position and
the previous position by pressing the ALTERNATE (
the remote control.
Remote Control
P
Remote Control
P
MENU
Front Control
LAMP
REPLACE WARNING
NPUT
MENU OK
Remote Control
) button on
p
P
MENU
TV Operation
Channel buttons
DIGIT button
P
P
OK
P P
POSITION Up/Down
button
TV MENU
OK
ON
TIMER
POSITION Up/Down
buttons
+
P
d e
7 8 d e
P P ALTERNATE button
TV MENU
OK
31