Video System Selection - Sanyo PLV-45WR1Z Owner's Manual

Video System Selection

Direct Operation
Select a system among Auto, PAL, SECAM and NTSC4.43by pressing
the C-SYS button on the remote control.
Menu Operation
1 Select the AV System Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
2 Choose the system that you want to select with the Point
Up/Down button and then press the OK button.
Video or S-Video Input
Auto
The LCD Projection TV automatically detects incoming video system,
and adjusts itself to optimize its performance.
PAL / SECAM / NTSC4.43 / NTSC
If the LCD Projection TV cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC4.43 and NTSC.
Component Input
Auto
The LCD Projection TV automatically detects incoming video signal,
and adjusts itself to optimize its performance.
Component Video Signal Format
If the LCD Projection TV cannot reproduce proper video image, it is
necessary to select a specific component video signal format among
480i, 575i, 480p, 575p, 720p, and 1080i.
Remote Control
OK
ON
TIMER
AUDIO-S VIDEO-S S.SYS C.SYS
LAMP
SCREEN AUTO PC FREEZE
MODE
AV System Menu (Video or S-Video)
AV System Menu (Component)
Video Input
C.SYS button
39