Table of Contents
Advertisement
1
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select SYSTEM and
press the SELECT (REAR CLICK) button. Another dialog box
VIDEO SYSTEM Menu will appear. (The display also appears by
pressing the SYSTEM button on the Front Control or the Remote
Control Units.)
2
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to "Auto", and then press the SELECT (REAR
CLICK) button.
Auto
The projector automatically detects the incoming Video system, and
adjusts itself to optimize its performance.
When the Video System is PAL-M or PAL-N, select the system
manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce the proper video image, it is
required to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, or PAL-N.
This projector can detect the signal from the video equipment
with component video signal, like DVD player. When connecting
to those equipment, select the type of Video source in VIDEO
SOURCE Menu.
1
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select VIDEO SOURCE
and press the SELECT (REAR CLICK) button. Another dialog
box VIDEO SOURCE Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the system that you want to select, and then
press the SELECT (REAR CLICK) button.
When the video source is from VIDEO, S-VIDEO, or
Video
BNC terminal, select "Video" in VIDEO SOURCE
Menu.
When connecting the video equipment through
Y, C
VIDEO-Y and VIDEO-C terminals to the projector,
select "Y, C" in VIDEO SOURCE Menu.
When connecting the video equipment on VIDEO-
Y, Cb,, Cr
Y, VIDEO-Cb, and VIDEO-Cr terminals to the
projector, select "Y, Cb, Cr" in VIDEO SOURCE
Menu.
SELECTING COLOR SYSTEM
SELECTING VIDEO SOURCE
This box indicates
the system being
selected.
VIDEO MODE
This box indicate the
Video source being
selected.
35
Advertisement
Table of Contents
