Product Overview; Controls - Toro Sand Pro 3040 Operator's Manual

Product Overview

1. Fuel-tank cap
2. Traction and stopping pedal 4. Parking lever

Controls

Traction and Stopping Pedal
The traction pedal (Figure
the machine forward, to move it backward, and to
stop the machine. Using the heel and toe of your right
foot, press the top of the pedal to move forward and
the bottom of the pedal to move backward or to assist
in stopping when moving forward
the pedal to move or move it to the
to stop the machine.
Important:
When driving the machine forward,
rest your heel on the foot rest; do not rest your
heal on the reverse pad of the traction pedal.
1. Traction and stopping pedal
3. Control panel
9) has 3 functions: to move
(Figure 10). Allow
position
NEUTRAL
Figure 9
Figure 8
5. Air cleaner
6. Hydraulic-tank cap
The ground speed is proportionate to how far you
press the traction pedal. For maximum ground speed,
press the pedal fully while the throttle is in the F
position. To get maximum power or when ascending
a hill, have the throttle in the F
pressing the pedal slightly to keep the engine speed
high. When the engine speed begins to decrease,
release the pedal slightly to allow the speed to
increase.
Important:
For maximum pulling power, move
the throttle to the F
the traction pedal.
g002708
Important:
Use the maximum ground speed only
when driving between job sites.
12
7. Steering wheel
Figure 10
position while
AST
position and lightly press
AST
g012207
g002709
AST