Setting Security Parameters; Setting General Conference Parameters - Huawei TP1102 Series Administrator's Manual

HUAWEI TP1102 Telepresence
Administrator Guide

3.5 Setting Security Parameters

Context
You can set the password for accessing Advanced Settings on the touch panel. This password
helps protect conference control information on the touch panel.
Procedure
Step 1 Choose
Step 2 In Current password, enter the current password. By default, no password is set.
Step 3 In New password and Confirm password, enter a new password.
Step 4 Tap OK.
----End
Follow-up Procedure
If you forget this password, select Huawei Telepresence from the touch panel's application
list and tap Clear Data. After you remove the custom data, you must set the connection
parameters again to connect to the telepresence host. If the connection to the telepresence host
fails and a message is displayed to indicate that another user has logged in, reconnect to the
telepresence host after 2 minutes.

3.6 Setting General Conference Parameters

Context
Before placing calls, set general conference parameters.
Procedure
Step 1 Tap
Step 2 Set the parameters described in
Table 3-3 General Conference parameters
Parameter
Dial number
type
Rate
Conference
password
Issue 01 (2013-07-15)
> Settings > Advanced Settings > Security Settings.
> Settings > General Conference Settings.
Table
Description
Specifies the line type used to call a site.
Specifies the conference bandwidth.
Specifies the conference password. This password is required for a site
to request chair control rights and allows anonymous sites to join the
conference.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-3.
3 Using the Touch Panel
21