Setting Conference Parameters; Setting Network Address Book Parameters - Huawei TP1102 Series Administrator's Manual

HUAWEI TP1102 Telepresence
Administrator Guide
Prerequisites
A 4E1 interface card has been installed in the codec.
Procedure
Step 1 On the Telepresence System Manager, click System Settings on the menu bar. Click the
tab.
Step 2 Set the 4E1 parameters.
Step 3 Click Save to save your settings.
----End

2.2.7 Setting Conference Parameters

Context
Using the Telepresence System Manager, you can set the conference initiation parameters.
Procedure
Step 1 On the Telepresence System Manager, click System Settings and then the Conference tab.
Step 2 Set the conference parameters.
Step 3 Click Save.
----End

2.2.8 Setting Network Address Book Parameters

Context
To download site records from the network address book, set the parameters used for
communication between the telepresence host and network address book server.
Procedure
Step 1 On the Telepresence System Manager, click System Settings on the menu bar. Click the
Network Address Book tab.
Step 2 Set the parameters for the network address book server, eSpace server, and LDAP server.
Step 3 Click Save to save your settings.
----End
Issue 01 (2013-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Using the Telepresence System Manager
12