Using Two-Stage Dialing - Huawei TP1102 Series Administrator's Manual

HUAWEI TP1102 Telepresence
Administrator Guide
To join a conference that allows anonymous sites, call the conference ID and use two-stage
dialing to join the conference.
Prerequisites
You have obtained the conference ID from the chair site using methods other than using the
terminal to call the chair site. Methods include contacting the system administrator.
Context
When initiating a multipoint conference, you can set the number of anonymous sites if the
number of total sites is uncertain. After the conference starts, the conference ID is sent to the
chair site. Then any site can join the conference by dialing the conference ID and then
following the interactive voice response (IVR) instructions.
Procedure
Step 1 Tap
Step 2 Tap the Keypad tab page and enter the conference ID.
Step 3 Tap
Step 4 When you hear an interactive voice response (IVR), tap
corresponding to the language you want.
Step 5 Enter the conference password and tap #.
----End
Issue 01 (2013-07-15)
9
from the home screen.
to place the calls.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Using Two-Stage Dialing

9 Using Two-Stage Dialing
and enter the number
42