Toro Groundsmaster 3500-D Operator's Manual page 7

This machine complies with the industry standard stability
test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal.
Review the instructions for operating the machine on
slopes in the Operator's Manual and the conditions in which
the machine is being operated to determine whether the
machine can be operated in the conditions on that day and
at that site. Changes in the terrain can result in a change
in slope operation for the machine. If possible, keep the
cutting units lowered to the ground while operating the
machine on slopes. Raising the cutting units while operating
on slopes can cause the machine to become unstable.
1. Tipping hazard—do not drive across slopes greater than
17 degrees.
1. Height-of-cut settings
121-3598
decal121-3598
121–3627
7
decal121-3627