Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
Note:
Determine the left and right sides of the machine from the normal operating position.
Description
No parts required
Decal (121-3598)
Lock bracket
Rivet
Washer
Screw (1/4 x 2 inches)
Locknut (1/4 inch)
Exhaust guard
Self-tapping screw
No parts required
No parts required
No parts required
No parts required
No parts required
Operator's Manual
Engine owner's manual
Parts Catalog
Operator training material
Engine warranty
Declaration of Conformity
Deck Installation Instructions
Qty.
Activate, charge, and connect the
–
battery.
1
Install the CE decals (if required).
1
2
1
Install the hood latch (CE only).
1
1
1
Install the exhaust guard (CE only).
4
–
Adjust the lift arms.
–
Adjust the carrier frame.
–
Adjust the height of cut.
–
Adjust the roller scraper (optional).
–
Install the mulching baffle (optional).
1
1
Read the manuals and view the
1
training materials before operating the
1
machine. Use the remaining parts for
1
the installation of attachments.
1
1
10
Use