Samsung AM JXVHGH Series Installation Manual page 81

• Do not let the power cable come into contact with the pipes inside the outdoor unit . If the power supply
cable touches the pipes, the vibration of the compressor is transferred to the pipes and can damage the
CAUTION
power supply cables or pipes, creating the danger of fire or explosion .
• Make sure that the place where the sheath of power supply cable is removed is inside the power supply
box . If it is impossible, you should connect the protection tube for power cable to the power supply box .
• After arranging the power cable into the power supply box, tighten the cover .
Connect the ring terminal of 3 phase cable
1 . Cut the power cable to an appropriate length and connect it with the
solderless terminal .
2 . After connecting the power cable to the terminal as seen in the
illustration, fix it with cable tie .
3 . Fix the housing, which has an insulator, to the terminal board .
Fixing the ground cable
f Connect the ground cable to the grounding hole inside the power supply X
box .
DVM S HE_IM_DB68-05461A-08_EN.indd 81
Grounding
81
2017-03-24 오후 1:38:39